SenseAir aSENSE Installation Manual

EM_aSENSE_all_housings_installation_Feb’04 1 of 8
Installation Manual for all housings











CO
2
/ temperature transmitter for wall mounting
Dismounting of the sensor
3
2
5
1
4
Pull the top part upwards
1
Push the front part upwards while Fold the front part forwards and
keeping the wall plate steady loose it from the hooks (#1)
1
top part
2 front part
3 wall plate
4 screw
5 label with
settings
inside the top
part

SenseAir aSENSE Specifications

General

Gas	Carbon Dioxide (CO2)
Sensing Principle	Non-dispersive infrared (NDIR)
Enclosure Rating	IP20
Measurement Range	0 to 2000 ppm
Operating Temperature	0 to 50 °C
Operating Humidity	0% to 95% RH (non-condensing)
Output Signal	4-20 mA