MS53 Laboratory Mixer Iss 6.doc
OPERATING, INSTALLATION & MAINTENANCE
MANUAL
FOR
MS-53 LABORATORY MIXER
This JISKOOT Product is designed to provide outstanding service if correctly installed, used
and maintained recognising the effects of the process conditions (temperature, pressure, wax/pour
point, sediment, etc.).
Truly representative sampling of crude oils etc., cannot be achieved by one single product in isolation.
A well designed system and operating procedures as laid down in the Sampling Standards ISO 3171,
API 8.2 and IP Chapter VI section 2 are mandatory.
Please consult Sensia for further information and assistance.
No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the
express written permission of Sensia.
To Next Page
Need help?
General