Sensidyne GILAIR-5 User Manual

16333 Bay Vista Dr. • Clearwater, Florida 33760 USA • (800) 451-9444 • (727) 530-3602 • (727) 539-0550 [FAX] • www.sensidyne.com
REF 360-0040-01 (F)
GILAIR-3 & GILAIR-5
AIR SAMPLING SYSTEMS
OPERATION MANUAL
WARNING
5
4
3
1
2
Battery
Fault
Flow
Possible static hazard. Do not
rub with dry cloth. Substitution
of components may impair
intrinsic safety. Use only
specified GilAir-3 battery packs.
See Labeling for intrinsic safety
approvals.
Personal Air Sampler
Gil ir3
AA
4
3
2
1
WARNING
5
4
3
1
2
Battery
Fault
Flow
Possible static hazard. Do not
rub with dry cloth. Substitution
of components may impair
intrinsic safety. Use only
specified GilAir-5 battery packs.
See Labeling for intrinsic safety
approvals.
Personal Air Sampler
Gil ir5
AA
5
4
3
1
2

Sensidyne GILAIR-5 Specifications

General

Brand	Sensidyne
Model	GILAIR-5
Category	Water Pump
Language	English

Summary

Safety Warnings and Precautions

Certifications and Approvals

European Economic Community Certifications

CE marking and ATEX intrinsic safety approvals for the European market.

United States Certifications

UL listing and hazardous location classifications for the US market.

Front Panel Overview and Indicators

Introduction to GilAir Systems

System Components

Details the physical parts and controls of the GilAir air sampling pumps.

Clock and Program Model Features

Explains the specific display icons and controls for Clock and Program models.

Pump Operation

Setting and Verifying Flow Rate

Step-by-step guide for calibrating and verifying the pump's flow rate.

Taking an Air Sample

Procedure for collecting air samples using the GilAir pumps.

Display Features

Stopping Sampling Run (Clock Model)

How to stop a sampling run and record data on the Clock model.

Display Self-Test (Clock Model)

Procedure to run a diagnostic test on the Clock model's display.

Retrieving Last Run Data (Clock Model)

How to view the data from the most recent sampling run on the Clock model.

Pausing a Sampling Run (Clock Model)

Instructions on how to pause and resume a sampling run on the Clock model.

Stopping Sampling Run (Program Model)

How to stop a sampling run and record data on the Program model.

Display Self-Test (Program Model)

Procedure to run a diagnostic test on the Program model's display.

Retrieving Last Run Data (Program Model)

How to view the data from the most recent sampling run on the Program model.

Pausing a Sampling Run (Program Model)

Instructions on how to pause and resume a sampling run on the Program model.

Programming the Pump (Program Model)

Detailed steps for programming the GilAir pump with custom sampling parameters.

Maintenance

Battery Maintenance and Charging

Procedures for charging, maintaining, and understanding battery life for Nickel-Cadmium and NiMH batteries.

Filter Maintenance and Replacement

Instructions on how to inspect, clean, and replace the inlet filter on the GilAir pumps.

Parts and Accessories

Technical Specifications

Troubleshooting

Constant Low Flow Module

Installing the Constant Low Flow Module

Steps for physically attaching the Constant Low Flow Module to the pump.

Constant Low Flow Calibration

Procedure for setting up and calibrating the Constant Low Flow Module.

Constant Low Flow Bag Sampling

Instructions for using the Constant Low Flow Module for bag sampling.

Multi-Flow Module

Installing the Multi-Flow Module

Steps for physically attaching the Multi-Flow Module to the pump.

Multi-Flow Calibration Setup

Procedure for setting up and calibrating the Multi-Flow Module for multiple samples.

Multi-Flow Bag Sampling Installation

Instructions for using the Multi-Flow Module for bag sampling.

Service and Support

Domestic Service Contacts

Contact information for Sensidyne LP in the USA for service and support.

European Service Contacts

Contact information for Goffin Meyvis in Europe for service and support.