To Next PageTo Next Page
Need help?Do you have a question about the Sensio Sigma 2 and is the answer not in the manual?
Lists items included in the package for the LED strip.
Covers measuring, cutting the strip, and checking polarity before installation.
Details on how to bend the LED strip and connect it properly.
Description of the 2.5-meter connection lead for the LED driver.
Description of the 1.5-meter lead for connecting multiple strips.
Details on the clip used for joining LED strip segments.
Specifies the physical dimensions and wattage per meter.
Details the Ingress Protection rating and required input voltage.
Lists the available colour temperature options for the LED strip.
Crucial safety advice, including reading instructions and electrician consultation.
Specific safety warnings regarding modifications, indoor use, and moisture.
Information on the proper disposal of electrical and electronic equipment.
Guidelines for cleaning and maintaining the LED strip.
General| Voltage | 24V DC |
|---|---|
| Wattage | 14.4W/m |
| IP Rating | IP20 |
| CRI | >80 |
| Power Consumption | 14.4W/m |
| Colour Temperature | 3000K / 4000K |
| Light Colour | White |
| Beam Angle | 120° |
| Dimming | Yes |
| Dimensions | 10mm width |
| Cuttable | Yes (every 5cm) |
