Sensit P100 - SENSIT P100 Device Components and Specifications; Device Component Identification; Standard Operating Procedure; Kit Options and Features

PRODUCT SPECIFICATIONS
Size: 3.81” x 2.31” x 0.8” (9.67 x 5.87 x 2 cm)
Weight: 3.6 oz. (105 g)
Operational Temp: -4 to 104 F (-20 to 40° C)
Humidity: 15-90% RH (Non-condensing)
Power Source: 3.6V Lithium Battery
Battery Life: 2+ Years
SENSOR SPECIFICATIONS
TYPE RESOLUTION RANGE
O2 0.1% 25%
CO* 1ppm 0-999*
H2S 1ppm 0-100
HCN 0.1ppm 0-30
SO
2
0.1ppm 0-20
Approvals
ALARM LEDs
SENSOR
SOUNDER
ON / OFF
GRAPHIC DISPLAY
ZERO / CALIBRATE
BELT CLIP (ON BACK)
Patented
TO OPERATE:
1. Press Power
2. Wait 30 Seconds for Automatic Zeroing
3. Begin to Use
STANDARD KIT
Belt Clip
Instruction Manual
OPTIONAL FEATURES
“Always On” Mode
Infrared Communication
*CO Extended Display Option:
Detection Range: 0ppm - .2% Volume (2000ppm equivalent)
Resolution: 1ppm for 0 – 999ppm
01% Volume for 1000ppm – 2000ppm
3-Year Operation
KIT OPTIONS
Bump Test Station
Calibration Kit
Ex ia IIC T4 (-20°C ≤ T
amb
to ≤ 50°C)
AEx ia IIC T4 (-20°C ≤ T
amb
to ≤ 50°C)
IP65
ATEX Cert. No.: TRAC 09 ATEX 11195X
EMC Directive (2004/108/EC)
EN 61000-4-2:1995, EN 61000-4-3:2002,
EN 55011:2007
2812 II 1 G
MET
®
USC
complies with
UL 913
CSA 22.2 NO. 157
LISTING NO: E112902
Class 1, Groups A, B, C, & D
Ex ia
Temp code: T4
*CO Extended Display Option:
Detection Range:
0ppm - .2% Volume
(2000ppm equivalent)
Resolution:
1ppm for 0 – 999ppm
01% Volume for 1000ppm – 2000ppm