What to do if Sensitec Thermometer reading is hampered by hair or perspiration?
If you are experiencing inaccurate temperature readings with your Sensitec Thermometer due to obstructions, ensure that there is no hair, perspiration, or other interference present before taking a temperature measurement.
Why does my Sensitec NF-3101 show a low body temperature?
If your Sensitec Thermometer displays a body temperature inferior to 32°C (89.6°F) while in Surface mode, it is likely showing the external temperature that your body releases, not your core body temperature.
What to do if temperature reading is hampered by an air flux with Sensitec NF-3101 Thermometer?
If you suspect that an air flux is affecting the accuracy of your Sensitec Thermometer readings, ensure there is no air flux present, as this could interfere with the infrared system and affect the temperature measurement.
What is the correct measuring distance for a Sensitec Thermometer?
To ensure accurate readings with your Sensitec Thermometer, maintain the correct measuring distance. The distance should be between 1 to 10 cm (0.39 to 3.9 inches).
How to get accurate reading with Sensitec NF-3101 Thermometer after temperature condition change?
To get an accurate body temperature reading with your Sensitec Thermometer after it has been exposed to high or low temperature conditions, wait for 10 minutes before taking the body temperature.
Install the battery for device operation.
Allow warm-up for first use or after battery replacement.
Device performs room temp test when turned on after long breaks.
Aim from 5cm, ensure forehead is clear of obstructions.
Measure behind the ear lobe if forehead is compromised.
Select Celsius (°C) or Fahrenheit (°F) for readings.
Configure the audible alarm threshold.
Adjust total variation for accurate body temperature.
Enable or disable the audible buzzer.
Turn off the device by pressing the MODE button.
Use Body mode for human temp, Surface for objects/environments.
View previous temperature measurements.
Carefully replace batteries, use single-use types only.
Device is designed for 40,000 takings.
Understand 'HI' and 'LO' readings based on measurement range.
Address issues like obstructed readings or incorrect distance.
General| Brand | Sensitec |
|---|---|
| Model | NF-3101 |
| Category | Thermometer |
| Language | English |
To Next Page