9
This is your wireless sensor:
It doe not have an on/off switch - simply ensure it is
charged using the USB power adapter provided. It
should be fully charged within 15-30mins and this
should last a few weeks when not in use, and up to a
week when in use.
You can check the battery charge level
in the application on your tablet. When reading data
from the sensor the charge percentage is shown at
the bottom of the screen.
The sensor base is magnetic. Affix it to any ferrous
surface to detect triaxial vibrations and surface
temperature. This information is then sent to your
tablet for viewing.
Metal base
with magnetic
attachment
Plastic housing
containing
electonics &
battery
To Next Page
Loading...