listed in the phone book can call each other.
5.5. Take off watch alert
If switched on, the watch will send alert message to monitor phone (default: off) and APP if
the sensor on watch detects that the watch is taken off.
Note: Watch users need to wear the watch for at least 3 minutes for this function to work.
5.6. Talk
Slide screen to enter “Talk” on watch, then have a chat with your friend.
6. Troubleshooting
If the watch fails to connect to the server and display disconnection on APP when turned
on for the first time. Please confirm:
(1) The sim card is properly installed and screen display is normal;
(2) The sim card is GSM sim, please note CDMA sim card is not supported;
(3) The sim card has activated 2G data traffic and have sufficient credit;
(4) The parameters including ID, IP and port of the watch are correct.
Send SMS message “pw,123456,ts#” from cell phone to watch. Then the watch will
reply its parameters in returned SMS. Make sure the watch is turned on with SIM card
installed and the SMS message was edited under English input method. Any further
questions, please contact your supplier.
7. APP Download
Scan the QR code below to download Android or IOS APP. You could also download
“SeTracker” directly from the App Store (IOS) and Google Play Store (Android).
Sentar
Model V80
Made in China
To Previous Page
Loading...