Need help?Do you have a question about the Sentex Crown Jewel and is the answer not in the manual?
General| Brand | Sentex |
|---|---|
| Model | Crown Jewel |
| Category | Intercom System |
| Language | English |
Step-by-step guide for the programming process.
Instructions for entering programming mode via the keypad.
Instructions for entering programming mode via a phone.
Instructions for entering programming mode via a remote phone.
System feedback signals indicating programming status.
System feedback signals for direct commands.
Other system audio feedback signals.
Description of different relay operational modes.
Configuration for Relay #2 and Status #2 input.
Procedure to create a new entry code.
Procedure to delete an existing entry code.
Setting the Crown Jewel's internal clock and calendar.
Creating time periods for access control.
Defining special calendar dates for system modification.
Procedure to create a DND schedule.
Procedure to delete a DND schedule.
Procedure to manually turn off DND feature.
Setting automatic unlock schedules for relays.
Programming the external phone number for call forwarding.
Removing a programmed call forwarding number.
Activating or deactivating the call forwarding feature.
Customizing touch-tone keys for visitor call functions.
Setting the ring type for incoming visitor calls.
Defining the maximum rings before call disconnection.
Commands for cycling, latching, and releasing relays.
Activating or deactivating direct command functionality.
Direct commands using touch-tone phone key combinations.
Procedure to change the system's password.
Verifying the programmed unit password.
Setting limits for incorrect keypad entries.
Instructions for programming multiple Crown Jewel units.
Setting the number of rings before answering remote calls.
Configuring alternate prefixes for commands.
Enabling/disabling mode when no phone line is used.
Overriding telephone company answering service.
Resetting the unit without power interruption.
Restoring the unit to its original factory configuration.
Resetting system memory to factory defaults.
Erasing all stored transaction data.
To Next Page
