Rev B Doc. 6001036 Page 1 of 20
IMPORTANT NOTICE
The Horizon system provides extremely powerful and user-friendly access control. However, if it is
programmed incorrectly, the system may function improperly and is likely to cause you and others a great deal
of inconvenience. Similarly, there are certain key things you and others in your building/complex must know
about using the system. Thus, you should take the time to read these instructions completely before
attempting to program or use your Horizon system. If you have any questions, your installing dealer will be
happy to assist you.
TABLE OF CONTENTS
This document is divided into ten (10) sections as follows:
SECTION NAME PAGE
1. Overview of system operation 2
2. Hints on system use and maintenance 3
3. Basic programming rules 4
4. The main programming menu 6
5. Initial system set-up (areas 0 to 6) 7
6. Entering and erasing telephone numbers,
and entry codes (areas 7, 8, 10, 11, and 12) 13
7. Verifying entries (area 13) 16
8. Directly controlling system relays 16
9. Other special functions (areas 9 and 73) 18
10. Alternative methods of programming and
using the system 20
IMPORTANT: The Sentex Systems, Inc. warranty on this system is conditioned upon Sentex Systems, Inc. being paid
in full for this equipment. This warranty will not be honored until such payment has been received by Sentex Systems, Inc.
COPYRIGHT 2000
ALL RIGHTS RESERVED
THIS DOCUMENT IS PROTECTED BY COPYRIGHT AND MAY NOT BE COPIED OR ADAPTED WITHOUT THE PRIOR WRITTEN
CONSENT OF SENTEX. THIS DOCUMENT CONTAINS INFORMATION PROPRIETARY TO SENTEX AND SUCH INFORMATION
MAY NOT BE DISTRIBUTED WITHOUT THE PRIOR WRITTEN CONSENT OF SENTEX. THE SOFTWARE AND FIRMWARE
INCLUDED IN THE HORIZON SYSTEM AS THEY RELATE TO THIS DOCUMENTATION ARE ALSO PROTECTED BY COPYRIGHT
AND CONTAIN INFORMATION PROPRIETARY TO SENTEX.
Sentex Systems
Chatsworth, CA
Visit us at
www.sentexsystems.com
To Next Page
Loading...