SentexSystems HORIZON User Manual

Doc.. 6001036
Rev B
INSTRUCTION MANUAL
INSTRUCTION MANUALINSTRUCTION MANUAL
INSTRUCTION MANUAL
FOR THE
FOR THEFOR THE
FOR THE
PROGRAMMING AND USE
PROGRAMMING AND USEPROGRAMMING AND USE
PROGRAMMING AND USE
OF
OFOF
OF
HORIZON SYSTEMS
HORIZON SYSTEMSHORIZON SYSTEMS
HORIZON SYSTEMS

SentexSystems HORIZON Specifications

General

Brand	SentexSystems
Model	HORIZON
Category	Intercom System
Language	English

Summary

1 - Overview of System Operation

1. Visitor Entry

Explains how visitors gain entry using the system, including dialling and relay activation.

2. Authorized Personnel/Occupant Entry

5 - Initial System Set-up

AREA 00 - Changing Programming Access Code

Explains how to change the programming access code for security and ease of recall.

AREA 01 - Setting Relay 2 Configuration

Details the six configurations for relay 2, including Control, Shunt, Alarm, CCTV, and Emergency Call.

AREA 02 - Setting Door Open Time

Defines the duration each relay remains activated, with settings for relay 1 and relay 2.

AREA 03 - Setting Strikes-and-Out

Specifies the number of consecutive incorrect codes before the system locks out access.

6 - Entering and Erasing Telephone Numbers and Entry Codes

AREA 07 - Entering Telephone Numbers

Guides on entering directory codes, telephone numbers, and tenant names into the system's directory.

AREA 08 - Entering Entry Codes

Explains how to set up 4-digit entry codes for occupants and service personnel.

AREA 10 - Erasing Telephone Numbers

AREA 11 - Erasing Entry Codes

AREA 12 - Erasing All Entries

8 - Directly Controlling System Relays

Remote Relay Activation

Explains how to activate system relays remotely via phone, using specific codes.

On-Site Relay Activation

Details the steps for activating system relays directly using the programming mode and specific codes.