Page 14 of 20 Doc. 6001036 Rev B
ENTER NAME _________________ DOE, JOHN P. +
ENTER
--NAME CAN BE 13 CHARACTERS
LONG, INCLUDING PUNCTUATION
AND SPACES.
--THE DIRECTORY IS ARRANGED
ALPHABETICALLY BY THE FIRST
CHARACTER IN THE NAME.
THEREFORE, "JOHN DOE" WILL
APPEAR IN THE "J" SECTION OF
THE DIRECTORY AND "DOE, JOHN"
WOULD APPEAR IN THE "D"
SECTION.
AREA 08 - ENTERING ENTRY CODES
PURPOSE: To set up 4-digit codes that can be used by occupants or service personnel to gain entry to your
building/complex without having to use a key or to contact someone inside. The number of
entry codes that your system can hold can be checked using area 13 selection 4 (see page 16).
SYSTEM PROMPT
EXAMPLE OF
TYPICAL ENTRY
IMPORTANT NOTES
ENTERING 4-DIGIT ENTRY CODE
(LESS THAN 9999) _____
1234 + ENTER YOU MAY NOT DUPLICATE CODES.
IF YOU TRY TO DO SO, THE SYSTEM
WILL GIVE AN ERROR MESSAGE.
MORE CODES? (1=YES, 0=NO) __ 1 + ENTER "1" RETURNS YOU TO THE FIRST
PROMPT, "0" TAKES YOU TO THE
MENU PROMPT.
AREA 09 - SETTING SPECIAL FUNCTIONS - SEE SECTION 9 OF THIS MANUAL
AREA 10 - ERASING TELEPHONE NUMBERS
PURPOSE: Allows individual telephone numbers, directory codes, and names to be erased from the
system's memory.
SYSTEM PROMPT
EXAMPLE OF
TYPICAL ENTRY
IMPORTANT NOTES
ENTER CODE TO ERASE __ 1234 + ENTER SYSTEM WILL RESPOND WITH THE
INFORMATION IN MEMORY
ASSOCIATED WITH THIS CODE.
TELEPHONE NUMBER: 5551212
NAME: DOE, JOHN P.
To Next Page
Loading...