- 61 -
• maintaining traceability of Class A replacement items or components to a specific exposure device or an
associated component.
• use of manufacturer specified items to maintain the integrity of the exposure device/transport package according
to the certifications. Do not use generic grade items or components that do not meet original design
specifications.
• performance of periodic inspections to verify the Class A items are not excessively worn from long term use or
have been damaged from accidents.
• use and handling of the system consistent with its design and intended application.
• promptly notifying the manufacturer in the event a Safety Class A item or component which contains a defect or
deviates from the original design specifications. This action will initiate a formal evaluation of the defect or
deviation.
To Next Page
Loading...