Need help?Do you have a question about the Sentinel FX140P and is the answer not in the manual?
General| Cut Type | Cross-Cut |
|---|---|
| Sheet Capacity | 14 sheets |
| Security Level | P-4 |
| Auto Start/Stop | Yes |
| Overload Protection | Yes |
| Shred Speed | 4.5 m/min |
| Shred Size | 4 x 35 mm |
| Throat Width | 230 mm |
Conditions that require immediate cessation of shredder operation due to potential danger.
Steps for initial setup and connecting the shredder to a power source.
Important warnings and advice to follow during the initial setup and first uses.
Instructions on how to resolve paper jams using the shredder's reverse function.
Guidance on what to do if the shredder overheats and how to cool it down.
Explanation of the sensor that stops the shredder when the waste bin is full.
Procedures for safely emptying the waste bin to prevent jams.
Advice on what small metal items can be shredded and what to avoid.
Essential guidelines for regular blade lubrication using approved products.
Detailed instructions on how to properly use lubricant sheets for optimal shredder performance.
To Next Page
