Sentinel Mini - User Manual

©2020 Sentinel Gaming Systems 1 Quick Setup/Operations Guide – Sentinel Mini 4.xx
Sentinel Mini Quick Setup and Operations Guide
`
1. Plug in the supplied USB/Ethernet Adapter and Keyboard to USB jacks on
the Side Panel as shown in the diagram above.
2. Plug Ethernet cables between the Ethernet Switch, Router or WIFI
Extender (optional) and the USB/Ethernet Adapter and Ethernet jack on
the System Rear Panel. Make sure to connect only to the “LAN”
connectors of the router or WIFI Extender.
3. Connect the primary video display monitor (1080p) to the HDMI
Connector using an HDMI to HDMI or HDMI to DVI-D cable. Plug the
monitor into an AC power outlet.
Front Panel
Rear Panel
USB 2.0 and 3.0
Connectors.
HDMI 2.0
Connector for
primary monitor
(must support
1080p resolution)
2
3
4
DC Power Cord
1
5
Ethernet Switch,
WIFI Extender or
Router (LAN connections)
USB Ethernet
Adapter
o
o
DisplayPort
1.2 Connector
for secondary
monitor
Side Panel
Keyboard
Reset Button
Ethernet port of
Router or wall plate
connected to router
(Ethernet Switch only)
Mic Input
USB C
USB 3.0
Audio Output
Kensington Lock
Key Lock
As a theft deterrent a Kensington style cable lock may be used to secure the Sentinel
Mini to a table or surface. A small key lock can also be used to lock the case.

Sentinel Mini Specifications