Sentrol ZX300 - User Manual

1
Installation/
Programming
SENTROL ZX300/ZX310
Expandable Security System Control

Summary

Zone Wiring

Class B End-of-Line Resistor Supervised Zones

Describes supervised zones using EOL resistors for enhanced security.

Programming the Control

Local Programming

Programming the system using a local control station.

Programming Zone Names

How to assign custom names to system zones.

Installer Level Programming

Menu Options

Lists the available programming options in installer mode.

Entering a New Value at a Location

How to input and save new values for programming locations.

Program Function Map

Accessing and programming the system's function map.

Installer Level Programming: Account, Codes, and Defaults

Programming Account Code and Telephone Number Digits

Setting account codes and telephone number digits for the system.

Program User Codes

How to program and manage user passcodes.

Restore Factory Defaults

Resets the control panel to its factory default settings.

Installer Level Programming: RF Data and Communication Tests

Program RF Data

Programming RF devices into the RF Gateway.

Installer Level Programming: RF Device Integration

Programming RF User Devices into RF Gateway

Configuring RF user devices for the RF Gateway.

Programming RF Devices into Control Panel

Configuring RF devices within the main control panel.

Sentrol ZX300 Specifications

General

Category	Security System
Weight	0.5 oz (14g)
Material	Plastic
Humidity Range	0% to 95% (non-condensing)
Type	Magnetic Contact Switch