Need help?Do you have a question about the Sentry CR106 and is the answer not in the manual?
Controls the power state and automatic function.
Adjusts audio volume and powers the radio on/off.
Visual indicator for when the alarm is set.
Indicates PM time on the display.
Selects between AM and FM radio bands.
Button used to adjust projection settings.
Cycles through different projection modes.
Initiates the process to set the alarm time.
Adjusts the hour when setting time or alarm.
Adjusts the minute when setting time or alarm.
Turns off the currently sounding alarm.
Sets the timer for the radio to turn off automatically.
Indicates the radio frequency being tuned.
Knob to sharpen or blur the projected time image.
Shows the current time and other indicators.
The unit that projects the time onto a surface.
Temporarily silences the alarm or activates display light.
Enables or disables the time projection feature.
Wire antenna for receiving FM radio signals.
Location for backup battery installation.
Rotary control for selecting radio stations.
Operates from AC 120V-60Hz mains supply.
9V battery provides backup for LED clock during power failure.
Steps to turn on, select band, adjust volume, and tune stations.
Procedure for setting the current hour and minute.
How to set an alarm to wake with radio or buzzer.
Functionality of the snooze feature for alarms.
Setting the radio to play for a specific duration.
Guide on using the time projection feature and setting time.
Activating the projection light for a short period.
AM: 530-1700 KHz, FM: 88-108 MHz.
Specifications for the built-in speaker.
Read, retain, heed warnings, follow instructions, avoid water.
Ventilation, heat sources, wall mounting, and power sources.
Polarized plug, power cord protection, and grounding.
Cleaning, non-use periods, object/liquid entry, and servicing.
Lightning storm protection and overloading risks.
To Next Page
General