After Drying
Drying
Buzzer beep or " :00"on display.0
1 2 3 4 5
open the door
and take out
laundry
pull out the
container
pour out
condensate
water
clean the filter power off
Quick Start
Before using, make sure it's installed properly.
Note!
1
plug in
2
load
3
close door
start
on
select program
select function
or default
If you are using a mains power socket with a switch,
press the switch to turn off the power directly.
Note!
OPERATIONS
1.Before drying, thoroughly spin the laundry in your washing machine.
High spin speed can the drying time and save energy
consumption.
2.For uniform drying result, sort the laundry according to fabric type
and drying programme.
3.Before drying, close zips, hooks and eyelets, button up, tie fabric
belts, etc.
4.Do not over dry clothes, because over dried clothes can easily get
creases.
5.Do not dry the articles containing rubber or similar elastic materials.
6.The door can be opened only after the programme of the drying
machine finishes to from being scalded by hot
steam or over heated drying machine.
7.Clean the lint filter and empty container after each use to avoid
extension of drying time and energy consumption.
8.Do not dry clothes after dry-clean process.
9.
reduce
prevent human skin
Choose the related programme when dryinng wool material clothes,
to make the cloth more fresh and fluffy.
Before Each Drying
Leave it to stand for 2 hours after transporting.
Before first use, use a soft
fabric cloth to clean the inside drum..
1.
2. .
3.
.
4.
Put some clean rags into the drum.
Plug in to the mains power, press 【On/Off 】
Select the 【Refresh】 Programme, press
【Start/Pause】 button
After finishing this programme, follow the
“Cleaning And Care” (refer to page 18) to clean
the filter door.
During drying, the compressor
and the water pump generate some noise
which is entirely normal.
Note!
12
13
To Next Page
Loading...