Need help?Do you have a question about the SEPLOS MASON-135 and is the answer not in the manual?
Guidelines for safe battery connection, including unpacking checks, power cutoff, and correct wiring procedures.
Procedures for safe operation, moving, repair, and fire handling, emphasizing proper extinguisher use.
Highlights key features like LiFePO4 chemistry, 3000+ cycles, smart BMS, flexible configuration, and multi-protocol support.
Technical specifications including voltage, capacity, energy, dimensions, cycle life, weight, temperature, and warranty.
Description of the physical interface and ports on the battery pack, including P+/P- and communication interfaces.
Details on the LiFePO4 battery cells used, including chemistry, grade, cycle life, and terminal type.
Explanation of the Battery Management System (BMS) functions, including monitoring, protection, and balancing.
Lists the core functions of the BMS: over-charge/discharge protection, over-current, cell balancing, temperature, and communication.
Describes remote monitoring using SEPLOS BATTERYMONITOR software via USB-RS485 adapter.
Lists compatible inverters for optimal battery module performance, including brands and protocols.
Guidance on assembling the battery pack, referring to the packing list for components.
Details the components included in the MASON-135 DIY Battery Kits for customer assembly.
Identifies ideal applications for the MASON-135, specifically Solar/Wind Systems and Off-grid applications.
Demonstrates DIP switch settings for RS485 communication address configuration for single and parallel packs.
Illustrates DIP switch configurations for CAN BUS communication address setup across various parallel pack arrangements.
General| Nominal Voltage | 51.2V |
|---|---|
| Nominal Capacity | 135Ah |
| Cycle Life | 6000 cycles @ 80% DOD |
| Discharge Current | 135A |
| Energy | 6912Wh |
| Charge Current | 67.5A |
| Communication | CAN, RS485 |
To Next Page
