Need help?Do you have a question about the Sequential Prophet-6 and is the answer not in the manual?
General| Type | Analog Synthesizer |
|---|---|
| Polyphony | 6 voices |
| Oscillators | 2 per voice |
| LFO | 1 LFO with multiple waveforms |
| Aftertouch | Yes |
| Arpeggiator | Yes |
| USB | Yes |
| Waveforms | Triangle, Sawtooth, Square |
| Effects | Chorus, Phase shifter |
| Keyboard | 49-key semi-weighted keyboard |
| Sequencer | Step sequencer |
| MIDI | In, Out, Thru |
| Inputs | Expression pedal input, sustain pedal input |
| Outputs | Headphone output |
| Audio Outputs | Stereo |
| Filters | 2/4 pole low-pass, Resonance |
Instructions on how to choose and recall programs using BANK, TENS, and PROGRAM SELECTOR buttons.
Explains how to modify existing programs by adjusting front panel controls.
Instructions for saving edited sounds to the same or different preset locations.
Details global parameters like Transpose, Master Tune, MIDI Channel, and MIDI Clock.
Details global parameters like Local Control, Seq Jack, Pot Mode, and Alt Tuning.
Explains Frequency, Fine tune, Shape, and Pulse Width controls for each oscillator.
Sets the output levels for Oscillator 1, Oscillator 2, Sub Octave, and Noise Generator.
Adjusts the cutoff frequency for low-pass and high-pass filters.
Emphasizes frequencies around the cutoff, potentially causing self-oscillation.
Amount of modulation from the filter envelope to the cutoff frequency.
Defines the Attack, Decay, Sustain, and Release times for the filter envelope.
Defines the Attack, Decay, Sustain, and Release times for the amplifier envelope.
Lists and describes the delay, chorus, phaser, and reverb effects available.
Details On/Off, Effect selection, Type, Mix, and Clock Sync controls.
Explains Filter Env and Osc 2 controls for modulation amount and destinations.
Details Tap Tempo, BPM, Value, On/Off, Octave, and Mode settings.
Guide to creating rhythmic and melodic sequences with up to 64 steps.
Details Record, Play, BPM, Tap Tempo, and Value settings for sequences.
Procedure for auto-calibrating oscillators and filters for optimal tuning.
Instructions for calibrating the pitch and mod wheels' positions.
Resets all global settings to their factory default values.
Addresses issues like sequencer stopping, sound differences, and ground hum.
Information on how to contact support, including required details.
To Next Page
