SEQURE MSS12 User Manual

MSS12 Intelligent Soldering Station Manual
MSS12 intelligent soldering station comes with 0.91 inch OLED display, supports PD3.0, DC5525 12V-25V/3S-6S power supply,
programmable firmware upgrade, Celsius and Fahrenheit switching, compatible with T12 soldering iron tips, the temperature can
be calibrated and compensated, and the intelligent temperature control can reach plus or minus 1 degree.
1. MSS12 Introduction
2. Menu Introduction
Work
8%
o
1
4
5
3
2
Main Interface
Level 1 Menu
1. TComp O c
2. Buzzer ON
o
Level 2 Menu
Main
interface
Stop mode
Work mode
Sleep mode
Soldering iron tip warning
High voltage warning
High temperature warning
Low voltage warning
PCB high
temperature warning
Power supply voltage
Soldering iron
tip temperature
Soldering iron tip warning
High temperature warning
High voltage warning
Low voltage warning
PCB high
temperature warning
Working temperature
setting value
Power percentage
Please readjust the position of the soldering iron tip or replace the soldering iron tip.
After the warning condition is eliminated, the warning icon will automatically change to Stop.
Short press the rotary switch to switch between working mode and stop mode.
Please use DC12-25V/3S-6S power supply. After the warning condition is eliminated,
the warning icon will automatically change to Stop.
Please disconnect the power supply, cool the soldering iron tip to room temperature,
and then re-energize to work. After the warning condition is eliminated, short press or turn
the rotary switch and the warning icon will change to Stop.
Please increase the supply voltage or decrease the LowVolt setting value.
After the warning condition is eliminated, short press or turn the rotary switch and the
warning icon will change to Stop.
Please disconnect the power supply, cool the soldering iron to room temperature,
and then re-energize to work. After the warning condition is eliminated,
short press or turn the rotary switch and the warning icon will change to Stop.
Please readjust the position of the soldering iron tip or replace the soldering iron tip.
Please disconnect the power supply, cool the soldering iron tip to room temperature,
and then re-energize to work.
Please disconnect the power supply, cool the soldering iron to room temperature,
and then re-energize to work.
Please use DC12-25V/3S-6S power supply.
Please increase the supply voltage or decrease the LowVolt setting value.
Turn the rotary switch to set the working temperature value.
/
/
/
/
1
2
3
4
5
Level 1 menu Level 2 menu Description Default value Setting range
（2）Level 1 Menu, Level 2 Menu
（1）Main Interface
1.Tcomp
2.Buzzer
3.TempUnit
4.WorkTemp
5.StartHeat
6.FactorySet
7.TempShield
8.TempStep
1.SleepTime
2.SleepTemp
3.IdleTime
4.Sensitive
5.ScreenOpen
Temperature compensation
Buzzer
Temperature unit
Working temperature
Automatic heating at startup
Restore factory settings
Stable temperature display
Main interface working temperature setting step value
Sleep time
Sleep temperature
Standby time
Wake-up sensitivity
Standby screen display
0℃
ON
℃
300℃
OFF
OFF
ON
10
180s
200℃
360s
5
ON
-20℃-20℃
OFF/ON
℃/℉
100℃-450℃
OFF/ON
OFF/ON
OFF/ON
10-50
60-990s
100℃-450℃
60-990s
1-30
OFF/ON
Iron
Thank you for using this product. Please read the manual carefully before using it to avoid errors in your operation.
Stop
Work
Sleep
C-T
H-V
H-T
L-V
P-T
20.0V
300℃
Check Tip
High-T
High-V
Low-V
Pcb-T
300℃
100%
Idle
Icon
display
Icon description
Method of operation

SEQURE MSS12 Specifications

General

Brand	SEQURE
Model	MSS12
Category	Soldering Gun
Language	English

Summary

MSS12 Intelligent Soldering Station Introduction

Menu System and Operation

Main Interface Overview

Details the elements and icons displayed on the main interface screen.

Menu Navigation and Levels

Explains the hierarchy and navigation between Level 1 and Level 2 menus.

Menu Operation Guide

Provides step-by-step instructions for operating the main interface and menus.

Temperature Calibration Procedure

Guides through the process of calibrating the soldering iron tip temperature.

Operational Modes and Functions

Warning Elimination Procedure

Describes how to resolve and clear warning indicators displayed on the station.

Sleep and Wake-Up Functionality

Explains the automatic sleep mode and how to wake the soldering station.

Technical Specifications, Updates, and Safety

Technical Reference Data

Provides key technical specifications like working voltage and heating times.

Firmware Update Instructions

Details how and where to obtain and perform firmware updates.

General Safety Precautions

Outlines essential safety guidelines for using the soldering station and accessories.