To Next PageTo Next Page
Need help?Do you have a question about the Sera iSTEP S 20 and is the answer not in the manual?
Specifies requirements for personnel operating, maintaining, or installing the pump.
Outlines potential risks and hazards resulting from not following safety guidelines.
Describes the pump's four interfaces for external control, flow monitoring, level connection, and manual control.
Guides through the initial setup process, including language selection and setting date/time.
Outlines the five different operating modes available: Manual, Impulse, Analogue, Batch, and Timer.
Provides a table of factory settings and explains how to adjust various parameters for pump operation.
Explains the configuration and function of the pump's three inputs and three outputs.
Describes the process for calibrating the flow rate indicator to ensure accurate delivery rate display.
Provides instructions and safety notes for replacing the pump's diaphragm.
Provides a table to help diagnose faults based on error messages and suggests corrective actions.
Offers a troubleshooting guide linking fault types to possible causes and corrective actions.
Specifies requirements for personnel operating, maintaining, or installing the pump.
Outlines potential risks and hazards resulting from not following safety guidelines.
Describes the pump's four interfaces for external control, flow monitoring, level connection, and manual control.
Guides through the initial setup process, including language selection and setting date/time.
Outlines the five different operating modes available: Manual, Impulse, Analogue, Batch, and Timer.
Provides a table of factory settings and explains how to adjust various parameters for pump operation.
Explains the configuration and function of the pump's three inputs and three outputs.
Describes the process for calibrating the flow rate indicator to ensure accurate delivery rate display.
Provides instructions and safety notes for replacing the pump's diaphragm.
Provides a table to help diagnose faults based on error messages and suggests corrective actions.
Offers a troubleshooting guide linking fault types to possible causes and corrective actions.
General| Supply voltage | 230 V |
|---|---|
| Power consumption | 400 W |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Cable Length | 10 m |
| Flow rate | 20 l/min |
| Fluid temperature | 35 °C |
| Max Flow Rate | 20 L/h |
