• Neither pierce the blanket with, nor attach safety pins or other
spiky or sharp objects to the pad.
• If the appliance is slept on with the controls set to a higher
temperature the user may suffer skin burns or heat stroke. For pro-
longed use, it is recommended that the temperature be set to "1".
• People with pacemakers should consult their physicians or the
manufacturer of the pacemaker before using the blanket, as the
electronic and magnetic emission from this product can affect
the pacemaker’s function under certain circumstance.
• do not use if wet.
• This appliance is not intended for medical use in hospitals.
• The cable and control unit of the appliance can give rise to risks of
entanglement, strangulation, tripping or treading if not correctly
arranged. The user shall make sure that excess ties and electric
cords shall be arranged in a safe way.
• Keep the mains cable away from hot surfaces.
• Plug ( ) the blankets into the mains outlet,connect the plug to an
electricity supply (AC220-240V). Make sure that the cable is not in
a position where the user may fall over it.
• If you require a higher temperature ( ) setting, please set the
temperature setting to 2 or 9. If you need a longer heating time,
please set the auto-off setting to 2 or 9
(20/40/60/80/100/120/140/160/180 min), the default is 20 min.
• Should the blankets get too warm for you, turn the switch back to
position 1.
• Position 2/3/4/5/6/7/8/9 of the blankets is intended for heating
up, only position 1 is for continuous operation.
• Move the selector switch to position 1 before falling asleep.
Operation
• Press the power button ( ) and then press the temperature
setting button, the blanket starts to work,the blue indicator will light
up. You will feel the blankets gradually warming up.
04
Important Safety Instruction
To Next Page