SereneLife EZ Bed User Manual

www.SereneLifeHome.com
Premium Raised Airbed
with Frame and Built-In Power
Inflating Pump (Twin)
This product may be covered under one or more of the following U.S. and/or foreign patents:
U.S. Pat. Nos.:
2,425,162; 2,610,119; 5,827,052; 6,004,116; 6,120,264; 6,332,760 B1; 6,457,192; 6,581,223; 6,679,686 B2; 6,722,306 B1; 6,754,925 B1; 6,754,926 B2;
6,763,540; 6,793,469; 6,990,700 B2; 7,020,921 B2; 7,040,347 B2; 7,114,207; 7,120,955; 7,152,265; 7,246,394; 7,306,694; 7,313,837; 7,334,274;
7,346,950 B2; 7,365,277; 7,387,920; 7,475,443; 7,497,416 B2; 7,597,123; 7,647,662; 7,739,760; 7,703,160; 7,739,763; 7,922,461 B2; 8,024,830 B2;
8,051,517; 8,151,390; 8,214,953; 8,549,686; 8,801,392; 8,863, 771; 9,062,668 B2; 9,121,519 B2; 9,157,433; 9,211,018; RE42, 559 E; GB2378987;
GB2396670; CN 221,800; ZL01129383 Others U.S. and International Patents Pending
Storage Case Panel
Bed Frame
Inate/Deate Control Switch
Air Inlet
Cord Storage Pocket
Pump Cool Down
Indicator
Air bed
EZ® BED SET UP
1
Unzip storage case completely
before ination, make sure
panel of storage case is laid at
on the oor, this will prevent
damage to bed frame and
ensure smooth extension out
of its storage case.
2
• Do not sit anything on top
or around bed during
ination cycle.
• Please allow clear area of
approximately 9ft in length
and 7ft in width, for proper
ination.
• Plug pump into a polarized
120VAC outlet.
• Turn switch to "Inate"
position, Airbed will begin
to inate.
5
EZ® BED is ready for use.
3
Airbed-frame will automatically
extend from its storage case.
4
• Pump does not turn off
automatically.
• When Airbed reaches desired
rmness, turn switch to "Off "
position.
• Unplug and store the cord in
the "Cord Storage Pocket"
Weight Limit:
600 LBS For King Size
500 LBS For Queen Size
300 LBS For Twin Size
Please see reverse side
for more information
EZ® BED protective casing
is not recommended for
airline travel

SereneLife EZ Bed Specifications

General

Brand	SereneLife
Model	EZ Bed
Category	Indoor Furnishing
Language	English

Summary

EZ® BED SET UP

Prepare Storage Case

Unzip storage case, lay panel flat to prevent damage and ensure smooth extension.

Inflation Process

Ensure clear area, plug pump into outlet, and turn switch to 'Inflate'.

Frame Extension and Pump Control

Airbed-frame extends automatically. Manually turn switch to 'Off' when firm.

Final Steps

Unplug pump, store cord in pocket. Airbed is ready for use.

STORAGE INSTRUCTIONS

Deflation Process

Clear area, plug pump, turn switch to 'Deflate', and allow pump to exhaust air.

Case Storage

Turn switch off, unplug, store cord. Lift frame, push back into case, zip up.

CARE AND MAINTENANCE

Cleaning

Clean airbed only with mild soap and water. Unplug before cleaning.

IMPORTANT SAFETY INFORMATION

General Warnings

Operate with care, avoid water, keep openings clear, do not insert objects, use indoors.

Pump Operation

Do not over-inflate, unplug before cleaning, avoid continuous use exceeding 5 minutes.

Repair Instructions

Deflate bed, clean area, apply patch, allow 4 hours for adhesion before inflating.

Product Features and Specifications

Key Features

Raised height, built-in pump, flocked surface, sturdy frame, wheeled storage case.

What's Included

Airbed with steel frame, electric pump, repair patches, and storage bag/case.

Technical Specifications

Material, thickness, coil type, weight capacity, and inflated dimensions.