www.SereneLifeHome.com
3
2. Install batteries to the base (3 new “D” Cell, alkaline batteries. Batteries NOT
included) make sure the power switch is at “On” location.
3. Setting the feeder per the following instruction
Quick Start Guide
1. Manual feeding Option and function check:press and hold “Manual” button
for 3 second, the rotor will rotate 1 portion. Repeat it 2 more times, if each time,
it will feed 1 portion. It means the machine with no problem.
Make sure the power
switch at “I” location.
Be sure to match positive
and negative markings)
INTERFACE
Manual
Button
To Next Page
Loading...