Need help?Do you have a question about the SereneLife IPCAMHD62 and is the answer not in the manual?
General| Two-Way Audio | Yes |
|---|---|
| Connectivity | Wi-Fi (2.4GHz) |
| Special Features | Motion Detection, Remote Viewing |
| Lens | 3.6mm |
| Operating Temperature | -10°C to 50°C |
| Night Vision | Yes |
| Mobile App | Yes |
| Power Source | DC 5V |
| Storage | MicroSD card (up to 128GB) |
| Operating Humidity | 10% to 90% |
Connect camera using Ethernet cable and power for initial setup.
Connect camera wirelessly to your network via Wi-Fi.
Control sound, microphone, snap photos, and view recordings/alarms.
Adjust image settings and configure local video recording.
View photos and videos stored on the SD memory card.
Access photos and videos recorded to phone memory.
Navigate recordings by specific date and time.
Check camera's software version and ID number.
Configure Wi-Fi connection for the camera.
Configure cloud storage options for the camera.
Set up motion detection alerts and notifications.
Define recording schedules by time and day.
Record directly to phone memory while app is open.
Utilize an SD card for flexible recording options.
Store recordings in the cloud for enhanced peace of mind.
Configure 24/7 or time-specific recording schedules.
Resolve problems with Wi-Fi connection and network access.
Troubleshoot issues with the camera not recognizing the SD card.
Address problems like app crashing or features not working.
To Next Page