www.SereneLifeHome.com 9
ASSEMBLY INSTRUCTIONS
•
Please keep this owner’s manual for future reference.
• Do not exceed 1/4” depth of small lava rocks directly above burner holes.
Applying too many lava rocks may result in unburned gas pooling in the re
bowl. Ventilation is required to allow fresh air in and any residual gas to escape.
• Do not use if lava rocks are wet. Be sure lava rocks are dry before lighting as
intense heat could cause the rocks to crack.
Carefully remove all items from the carton. Be sure all packaging, both under the
re pit and around the re bowl, is removed before using.
A. Check each part before using the product. Make sure the gas supply system is
turned “OFF” before assembling. See Figure A.
Figure A
To Next Page
Loading...