4. HOW TO USE YOUR OVERRIDE KEYS
For your convenience, we have engineered a manual override system for
your safe. We have supplied 2 override keys. These keys allow you to
open the safe at all times, even when the batteries are run down or when
you have forgotten your code. The keyhole is situated behind the over
ride cover plate (logo) beside the knob. Take o the cover, insert the
override key and turn anti-clockwise; then open the safe as usual.
5. TO REPLACE THE BATTERIES
If the red light is on with the green light, when you input your personal
code to open the safe, it means the batteries are low and you should
change the batteries. To be sure the batteries are installed correctly,
please test the code before you close the door.
Always use alkaline batteries only.
6. INSTALLING THE SAFE
The safe can be secured to the oor, wall or in a cupboard.
For your convenience, there are holes both in the bottom and on the
back of the safe, so it can be xed by the expansion bolts supplied.
WARNING:
a.
Please keep the override keys of the safe in another safe place.
Not inside the safe.
b. In the event the keys are lost, the code is misplaced and the batteries are
weak, the supplier does not take responsibility for this product.
www.SereneLifeHome.com
To Previous Page
Loading...