30
When the engine is hot
. The ignition switch is in the ON position
2. Accelerate and keep the rpm at 1/8 or 1/4 of its maximum capacity.
3. Turn the engine start stepping lever or pressing the power button. No need to use the system carburetor choke once the engine is hot. In
cold weather the engine may require longer to warm up.
Warning
Never run the engine in enclosed spaces with poor ventilation. Carbon monoxide is highly toxic smoke. Never leave the motorcycle unattended
lighted.
Warning
Never leave the engine running in a stationary position for a long period of time. Otherwise the engine may overheat and engine parts can be
damaged.
Operating the clutch, put the vehicle in first, turn the throttle gently in the direction towards the driver, and simultaneously slowly release the
clutch; this motorcycle will start running. To change gears first slow down, engage the clutch, select the gear shift pedal to slowly release the
clutch and accelerate smoothly. Repeat these steps to achieve the highest gear.
To Next Page
Loading...
Need help?
General
