Serta 49347 - Page 6

6
Step 5
Attach the Back Cushion (G) to the Seat Cushion
(F) by positioning the back support plate over the
Seat Plate (D) with1-1/4” Screws (J).
*Note: Do not tighten the screws completely.
Step 6
Insert 1-1/2" Screws with Spring Washers (K) into
arm holes attaching Arms (E1 & E2) (with front of
arms facing the front of seat cushion) to sides of
Seat Cushion (F) and Back Cushion (G).
*Note: Tighten all the screws completely.
Remember to tighten the back support plate
screws.
N
F
G
J
D
N
F
G
K
E1