4 of 12
9 of 12
Place sofa body as shown below.
Insert both connecting bars to bottom metal frame (left sofa body), until pre-drilled
holes are aligned. Next secure the metal frame and connecting bar with two bolts at
each side. Do not tighten them yet.
Repeat Step 2 on the right sofa body as shown below.
2
3
Converting to Sofa
Standing at the side of the unit (from bed position), lift backrest to the desired position
and secure in place by releasing to the sound of a click.
OPERATING YOUR UNIT
Converting to Lounger
In bed position, lift backrest upwards with each click sound until the desired lounge
position is reached.
To Next Page
Loading...
