DO NOT USE CHAIR UNTIL YOU HAVE FULLY READ THE INSTRUCTIONS
5.4 SAFETY INSTRUCTIONS
PLEASE READ THE FOLLOWING SAFETY INFORMATION CAREFULLY. IT IS IMPORTANT FOR EVERYONE WHO IS TO
CONNECT, INSTALL OR USE THE SYSTEMS TO HAVE THE NECESSARY INFORMATION AND ACCESS TO THIS MANUAL.
Classication:
The equipment is not suitable for use in the presence of a ammable anaesthetic mixture with air or with oxygen or
nitrous oxide.
Warning!
The plastic parts in the system cannot tolerate cutting oil.
Warning!
If faults are observed, the products must be replaced.
Never spray directly on the products with a high pressure cleaner.
The LINAK products cannot tolerate the inuence of strong solvents, basic or alkaline liquids.
The duty cycle printed on the label of the control box must always be noted. If this is exceeded, there is a risk of the
control box being overheated and damaged. Unless otherwise specied on the label, the duty cycle is max. 10%: max.
2 minutes in use followed by 18 minutes not in use. Exceeding the duty cycle will result in a dramatic reduction in the
lifespan of the product.
Technical Data
Linak Systems – Tech Data and Reset Info
SWL 160kg Chairs Pages 17-22
SWL 160kg Chairs Pages 23-24
SWL 300kg & 350kg Chairs Pages 25-26
16 © 2019Careleda M-03 WI-204rev 6 Edited 29.10.2019
To Next Page
Loading...