EasyManua.ls Logo

Servco The love house J-1602 User Manual

Default Icon
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
The "love house"J-1602 typesound control dog no barking device
Dogs are human friends, It brings endless joy and comfort to the owner, Sometimes it will
be barking for no reason, quarreled neighbors. Is there any way to keep it quiet?
The "love house"J-1602 typesound control dog no barking device, It is through the
sound to trigger the work, When the dog barking continuously, the device is triggered,
issued 8 seconds harsh ultrasound (people can not hear, the dog can hear), This makes
the dog feel uncomfortable, but is absolutely no harm to the dog. After repeated times, the
dog will establish a conditioned reflex, it knows that this sharp noise is due to their barking
caused, and then it is no longer easily barking. J-1602 uses the sound accumulation
trigger mode, A separate dog barking or the surrounding noise does not trigger this device.
Only three consecutive dogs above the dog will be triggered, so that the effective filter out
because of the environment noise or occasional call caused by the dog mistakenly
triggered, so as not to disturb your dog for no reason. Considering that some of the
environment is not convenient to install the power outlet, J-1602 using mains or lithium
battery.
Installation method: The device should be placed at 1-4 meters near the kennel ,can also
be hung on the wall (Fig 1), Although it has a certain degree of rainproof performanceIt
should be placed on no rain, not wet and difficult to meet the place.
Question and Answer IconNeed help?

Do you have a question about the Servco The love house J-1602 and is the answer not in the manual?

Servco The love house J-1602 Specifications

General IconGeneral
BrandServco
ModelThe love house J-1602
CategoryPet Care Product
LanguageEnglish

Summary

J-1602 Sound Control Dog Barking Device Overview

Installation Method

Details on how and where to place the device for optimal performance, considering environmental factors.

Device Operation Instructions

Booting and Triggering

Guides on how to power on the device, connect power, and trigger its ultrasonic output.

Sensitivity Adjustment

Instructions for adjusting the sensitivity handle to control the device's response to barking.

Charging and Technical Details

Charging the Device

Procedure for charging the device's lithium battery, including power requirements and indicators.

Device Specifications

Key technical specifications including charger output, battery, sound pressure, and current.

Important Usage Notes

Safety and Handling Precautions

Essential warnings for users regarding ultrasonic wave exposure and battery management.

Product Comparison and Effectiveness

Information comparing the J-1602 to older models and notes on dog response variability.