Page 4
UNPLUG CORD
2
UNIT TAKE-DOWN
PRESS POWER BUTTON
to turn unit off.
1
EMPTY WATER FROM BASIN
after each use.
4
REMOVE PAN(S) FROM BASIN
3
CAUTION- HOT
Allow unit to cool before continuing.
TIP: Remember to empty the
water each day rather than add—
This will greatly extend the life
of your warmer.
Proper drying after each use helps
maintain the aluminum heat plate
and the stainless steel.
DRY
thoroughly with a soft dry cloth.
5
UNITS WITH 230 VOLTS
also have a power switch.
Press to OFF position.
To Next Page
Loading...