5
SERVICEVISION BIS SL
Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31
comercial@servicevision.es · www.servicevision.es
Adjustable rods allow you a very quick head configuration (compact or large) as
well as a very quick camera balance by using the camera support base.
To balance the camera always start with the Y axis. Position the camera in
cenital (vertical) position, move the adjustable rods for balance. Then the X axis,
position the camera in perpendicular position (90º to the flor) and slide the camera
support plate front or backwards for balance.
Y
X
To Next Page
