7
SERVICEVISION BIS SL
Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31
comercial@servicevision.es · www.servicevision.es
Tilt axis:
It houses the Driver board for the motor of the tilt axis, this board is controlled
by the Servo board located in the Pan Axis.
Camera power (12V/10A) (BURNDY, 4 pin female, panel mount, UT00104ST).
The green LED light will indicate that 12V output is correctly working.
It also has an LED light to indicate the status of
the Driver board (same color code than in Pan
axis). The red Lemo connector (LEMO, 5 pin
female, panel mount, EGG.1B.305) is for the
Scorpio FIZ control, it powers the box and
communicate with the system, for both Scorpio
Servolens Control and the Scorpio Motor Driver
To Next Page
