17 18
T: 0800 0124 382 T: 0800 0124 382
USAGE
CONTROL PANEL OVERVIEW RUNNING YOUR FIRST WASH
Before using your Washing Machine for the first time; check that:
1
The transit bolts have been removed.
2
Your Washing Machine has been correctly connected to your water supply and your water
drainage system.
3
Your Washing Machine has been connected to an appropriate mains power supply and is
switched on at the socket.
Tests were carried out on your Washing Machine at the factory; as a result, water may be left in
the machine. To remove any water we recommend that the first wash is carried out without any
laundry:
1
Open the detergent drawer, pour in half a measuring cup of all-purpose detergent, close
the drawer and select programme 1 (White cotton at 95
0
C on the programme selection
dial). If using a liquid detergent, refer to page 20 for details on how to insert the fluid level
detergent plate.
2
Close the door until it clicks shut.
3
Press the button.
Please follow the steps suggested below to get the best results from your washing.
Preparing Your Laundry:
CAUTION:
Please be aware that any foreign objects such as coins or paper clips can cause
damage to your garments and components in your Washing Machine.
Empty all pockets on items of clothing, brush out any sand and dirt from pockets and cuffs.
WASHING SEQUENCE
1
Programme Dial; Allows you to select a wash programme
2
Mode Button; Allows you to access the temperature and programme start time options
3
Electronic Display
4
Select Button; Allows you to set the temperature and programme start time
5
Spin Speed Selector; Allows you to adjust the spin speed
6
Pre-Wash Indicator Lamp
7
Wash Indicator Lamp
8
Rinse Indicator Lamp
9
Spin and Drain Indicator Lamp
10
Rinse Hold
Extra Rinse
Soak
Easy ironing
Programme Start/Pause Button; Start or Pause the selected programme
Figure 10
1 2 4 5
6
7
8
3
9
11
12
11
10
14
12
13
13
14
To Next Page
Loading...