BASIC CONTROLS
-LEVEL: Controls the overall volume of the pedal.
-TONE: Classic tone control. Turn clockwise to boost high
frequency range and counterclockwise to attenuate it.
-GAIN: Sets the saturation produced by the effect.
-BOOST: Controls the level of the boost. The boost section
is placed after the gain section and adds an extra +15dB of
clean boost.
-BOOST ON/OFF SWITCH: Activates or deactivates the boost.
FINE ADJUSTMENT: The pedal has three small trimmers insi-
de. These trimmers change the behavior of the tone, gain and
boost potentiometers. We don’t recommend to change these va-
lues, but if you want to make experiments feel free to play
with them!
EXPRESSION PEDAL/CV
You can assign an expression pedal or CV signal (0V-5V) to
the gain and level parameters. Choose the desired parameter
to control with the EXP/CV SWITCH, and now you can control
this parameter with an expression pedal or a CV signal. When
the switch is at its middle position the expression pedal/CV
input is inactive.
Compatible Expression
pedal schematic
To Next Page
Loading...