Need help?Do you have a question about the Sesamo DUALCORE LH100 and is the answer not in the manual?
Defines hazard symbols like DANGER and WARNING for user safety.
Outlines essential safety duties for installation technicians.
Lists RD100 specific parts and instructions for securely mounting the system housing.
Details procedures for belt assembly, tensioning, and aligning door meeting points.
Instructions for installing an optional electric lock and the emergency release lever.
Describes the main parts of the Dualcore control unit and its power supply.
Provides a table for connecting various sensors (A, B, C, D) to the processor terminals.
Lists terminal board connections for various inputs and outputs according to EN16005 standard.
Explains the procedure for the Dualcore control unit to automatically detect and configure connected sensors.
Explains error codes and potential causes during the sensor acquisition procedure.
Lists parameters related to locks, auxiliary inputs, and outputs with their default values.
Covers remaining parameters and explains how to restore factory settings.
Details normal operating display indicators and common operational faults with causes and solutions.
Lists and explains error messages specific to the RD100 automated system.
Covers final steps, sticker application, and providing customer documentation.
Details the functions and settings of the advanced selector for LH100/LH140 models.
Details the logic selection and functions of the selector for the RD100 automated system.
Outlines the checks and procedures for scheduled maintenance by technicians.
General| Power supply | 230V AC |
|---|---|
| Motor voltage | 24V DC |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Maximum Door Weight | 100 Kg |
| Max. door weight | 100 Kg |
| Number of Remote Controls | 2 |
| Safety Sensors | Yes |
| Manual Release | Yes |
| Installation Type | Ceiling |
| Operating temperature | -20°C / +50°C |
To Next Page
