10
104 x 142 mm
Crêpe Maker
Dear Customer,
Before using the appliance, read the
following instructions carefully and keep
this manual for future reference. The
appliance must only be used by persons
familiar with these instructions.
Connection to the mains supply
The appliance should only be connected to
an earthed socket installed in accordance
with the regulations.
Make sure that the supply voltage
corresponds with the voltage marked
on the rating label of the appliance. This
product complies with all binding CE
labelling directives.
Intended use
∙ This appliance must only be used for
making crêpes, galettes or similar thin
pancakes.
∙ The appliance is not designed for grilling
or frying.
∙ Any use other than that described in
these instructions must be considered
improper and may lead to personal
injury or material damage.
Familiarisation
1. Crêpe plate
2. Housing
3. Flip-over tool
4. Smoothing tool
5. Wind-up power cord storage (on
underside)
6. Temperature control with indicator light
7. Power cord with plug
Important safety instructions
∙ In order to comply with
safety regulations and to
avoid hazards, repairs of
electrical appliances must
be carried out by qualied
personnel, including the
replacement of the power
cord. If repairs are needed,
please send the appliance
to one of our customer
service departments. The
address can be found in the
appendix to this manual.
∙ Before cleaning the
appliance, ensure it is
disconnected from the
power supply and has
cooled down completely.
∙ To avoid any risk of electric
shock, do not clean the
appliance with liquids or
immerse it in a liquid.
GB
To Next Page
Loading...
