To Next PageTo Next PageWhat to do if my SEVERIN Cooktop shows error E07?
If your SEVERIN Cooktop displays error E07, it means the cooking temperature has exceeded 240 °C. Turn the unit off, disconnect it from the power supply, and allow it to cool down. If the problem persists, contact customer service.
Why is my SEVERIN Cooktop in stand-by mode with no display information and beeping?
The SEVERIN Cooktop might be in stand-by mode, displaying no information, and emitting beep sounds because you are using unsuitable cookware. This could be due to the cookware having a non-magnetic base or a diameter less than 18 cm. Please, see ‘Suitable cookware’ section.
What to do if my SEVERIN DK 1031 shows error E01?
If your SEVERIN Cooktop displays error code E01, it indicates that the mains voltage is below 160 V. To resolve this, connect the unit to an outlet that is installed according to regulations and provides a supply voltage between 220 and 240 V.
What to do if my SEVERIN DK 1031 shows error E02?
If your SEVERIN Cooktop displays error code E02, it indicates that the mains voltage exceeds 270 V. To resolve this, connect the unit to an outlet that is installed according to regulations and provides a supply voltage between 220 and 240 V.
What to do if my SEVERIN DK 1031 Cooktop shows error E03?
If your SEVERIN Cooktop shows error E03, this indicates an internal fault. Contact customer service for assistance.
What to do if my SEVERIN DK 1031 Cooktop shows error E06?
If your SEVERIN Cooktop shows error E06, this indicates an internal fault. Contact customer service for assistance.
What to do if my SEVERIN DK 1031 shows error E08?
If your SEVERIN Cooktop shows error E08, this indicates an internal fault. Contact customer service for assistance.
General
