What to do if my SEVERIN KP 1071 shows error E07?
If your SEVERIN Cooktop displays error E07, it means the cooking temperature has exceeded 240 °C. Turn the unit off, disconnect it from the power supply, and allow it to cool down. If the problem persists, contact customer service.
Why is my SEVERIN KP 1071 in stand-by mode with no display information and beeping?
The SEVERIN Cooktop might be in stand-by mode, displaying no information, and emitting beep sounds because you are using unsuitable cookware. This could be due to the cookware having a non-magnetic base or a diameter less than 18 cm. Please, see ‘Suitable cookware’ section.
What to do if my SEVERIN KP 1071 Cooktop shows error E01?
If your SEVERIN Cooktop displays error code E01, it indicates that the mains voltage is below 160 V. To resolve this, connect the unit to an outlet that is installed according to regulations and provides a supply voltage between 220 and 240 V.
What to do if my SEVERIN Cooktop shows error E02?
If your SEVERIN Cooktop displays error code E02, it indicates that the mains voltage exceeds 270 V. To resolve this, connect the unit to an outlet that is installed according to regulations and provides a supply voltage between 220 and 240 V.
What to do if my SEVERIN Cooktop shows error E03?
If your SEVERIN Cooktop shows error E03, this indicates an internal fault. Contact customer service for assistance.
What to do if my SEVERIN KP 1071 shows error E06?
If your SEVERIN Cooktop shows error E06, this indicates an internal fault. Contact customer service for assistance.
What to do if my SEVERIN KP 1071 shows error E08?
If your SEVERIN Cooktop shows error E08, this indicates an internal fault. Contact customer service for assistance.
What to do if my SEVERIN KP 1071 Cooktop is beeping and the display is blank?
If your SEVERIN Cooktop is in standby mode, shows no information on the display, and emits sound signals, it could be due to using unsuitable cookware. Ensure that you are using cookware with a magnetic base and a diameter of at least 18 cm. Refer to the 'suitable cookware' section for more details.
Why does my SEVERIN Cooktop show error E07?
If your SEVERIN Cooktop displays error code E07, it means the appliance is in 'Power' mode and the cooking temperature exceeds 240°C. Turn off the appliance, unplug it, and allow it to cool down. If the problem persists, contact customer service.
How to fix error E01 on my SEVERIN Cooktop?
If your SEVERIN Cooktop shows error code E01, it indicates that the mains voltage is below 160 V. To resolve this, plug the appliance into a properly installed socket with a supply voltage between 220 and 240 V.
Covers essential safety measures for operating, cleaning, and potential hazards of the appliance.
Outlines precautions regarding children's interaction and supervision with the appliance.
Instructions for checking the appliance for defects and warnings about using damaged units.
Lists specific error codes, their causes, and recommended actions for resolution.
Describes the error message for non-magnetic base or small diameter cookware.
General| Hob type | Zone induction hob |
|---|---|
| Product color | Black |
| Top surface type | Glass-ceramic |
| Appliance placement | Countertop |
| Cooking zone 1 type | Regular |
| Cooking zone 1 power | 1500 W |
| Cooking zone 1 shape | Round |
| Cooking zone 1 diameter | 180 mm |
| Cooking zone 1 position | Central |
| Number of cooking zones | 1 zone(s) |
| Cooking zone 1 power source | Electric |
| Number of gas cooking zones | 0 zone(s) |
| Regular cooking zone diameter | 220 mm |
| Regular cooking zone | 2000 W |
| Number of power levels | 10 |
| Control type | Touch |
| Built-in display | Yes |
Weight and Dimensions| Depth | 350 mm |
|---|---|
| Width | 280 mm |
| Height | 42 mm |
To Next Page
