SEVERIN KP 1071 User Manual

15
Troubleshooting
In the case of problems, the following error messages may appear on the display:
Error message Cause Action to be taken
E01
The mains voltage is
below 160 V.
Connect the unit to an outlet installed in
accordance with the regulations, with a
supply voltage between 220 and 240 V.
E02
The mains voltage
exceeds 270 V.
Connect the unit to an outlet installed in
accordance with the regulations, with a
supply voltage between 220 and 240 V.
E03 Internal fault Contact customer service.
E06 Internal fault Contact customer service
E07
The cooking
temperature exceeds
240 °C.
Turn the unit off, disconnect it from the
mains and allow it to cool down. Contact
customer service if the problem occurs
repeatedly.
E08 Internal fault Contact customer service.
The unit is in
stand-by mode,
no information
shows on the
display, and beep
signals are heard
Unsuitable cookware
(non-magnetic base,
diameter less than
12 cm)
See ‘Suitable cookware’ section

SEVERIN KP 1071 Specifications

General

Hob type	Zone induction hob
Product color	Black
Top surface type	Glass-ceramic
Appliance placement	Countertop
Cooking zone 1 type	Regular
Cooking zone 1 power	1500 W
Cooking zone 1 shape	Round
Cooking zone 1 diameter	180 mm
Cooking zone 1 position	Central
Number of cooking zones	1 zone(s)
Cooking zone 1 power source	Electric
Number of gas cooking zones	0 zone(s)
Regular cooking zone diameter	220 mm
Regular cooking zone	2000 W
Number of power levels	10
Control type	Touch
Built-in display	Yes

Weight and Dimensions

Depth	350 mm
Width	280 mm
Height	42 mm