10
Food processor
Dear Customer,
Before using the appliance, please read the
following instructions carefully and keep this
manual for future reference. The appliance
must only be used by persons familiar with
these instructions.
Connection to the mains supply
Make sure that the supply voltage
corresponds with the voltage marked on the
rating label. This product complies with all
binding CE labelling directives.
Main unit and accessory components
1. Main unit
2. Operating switch
3. Power cord with plug
4. Protective blade-cover
5. Drive clutch
6. Drive shaft
7. Bowl
8. Drive shaft extension
9. Chopping/mincing blade
10. Kneading insert
11. Mounting with slicing attachment
12. Grating insert
13. Bowl lid
14. Pestle
15. Blender jug with lid
Important safety instructions
∙ In order to avoid hazards,
and to comply with safety
requirements, repairs to this
electrical appliance or its
power cord must be carried
out by our customer service.
If repairs are needed, please
send the appliance to our
customer service department
(see appendix).
∙ Before cleaning the appliance,
ensure it is disconnected from
the power supply and has
cooled down completely.
∙ To avoid the risk of electric
shock, do not clean the
appliance with water and do
not immerse it in water.
∙ Clean the blender jug, stirring
bowl and stirring attachments
in hot soapy water.
∙ For detailed information on
cleaning the appliance, please
refer to the section Cleaning
and care.
∙ Caution: Do not fi ll the jug
with hot liquid.
∙ Care is required when pouring
hot liquids into the food
processor or blender in case
a jet of vapour should escape
from the appliance.
∙ Caution: Any misuse can
GB
To Next Page
Loading...
