Power settings
Power (P) Display Type
1 x 900W P100 (100%) High Heating up liquids, cooking
2 x 810W P-90 (90%)
3 x 720W P-80 (80%)
4 x 630W P-70 (70%) Medium high Defrosting and heating up deep-frozen dishes
5 x 540W P-60 (60%)
6 x 450W P-50 (50%) Medium Cooking delicate food
7 x 360W P-40 (40%)
8 x 270W P-30 (30%) Defrosting Defrosting food
9 x 180W P-20 (20%)
10 x 90W P-10 (10%) Defrosting Defrosting sensitive food.
11 x P-00 (00%) No microwave function, cooling fan only
Example: to programme the microwave function for a cooking time of 5 minutes at 50% power.
1. Press
6 times. The display shows P- 50.
2. Turn the rotary control
until the display shows 5:00.
3. Press the rotary control
to start the programme.
Quick-programming
:
The most commonly used microwave time-settings can be called up simply by pressing the rotary
control
. With this function, the microwave power setting is always 100%. Each press on the
rotary control
adds 30 seconds to the cooking time. The maximum pre-programmable time is 10
minutes.
Note: the cooking process starts as soon as the rotary control is pressed.
Example: to programme the microwave function for a cooking time of 2 minutes at 100% power.
Press the rotary control
4 times. The display shows 2:00 and the microwave
operation starts.
Hot-air function
:
With this function, hot air circulates inside the oven, achieving an even cooking and browning
process. The pre-programmable temperature range is between 110°C and 200°C. The temperature is
set by pressing
the appropriate number of times. The cooking time can be pre-set to a maximum
of 95 minutes.
If required, the appliance may also be pre-heated. Select the desired temperature level and press the
rotary control
.
Example: the appliance is to be pre-heated to 190°C, followed by a cooking time of 20 minutes.
1. Press
9 times to set the required temperature. The display shows 190 C.
2. Press the rotary control
to start the pre-heating process. The timer display starts
counting down from 30:00.
3. After a few minutes, once the pre-set temperature has been reached, a beep signal is heard at
regular intervals.
4. Open the door and place the food inside the oven compartment.
23
To Next Page