To Next Page
S
Sherry ChaneyAug 11, 2025
Why does my SEVERIN SC 7141 Ultrasonic Jewelry Cleaner leave streaks?
- JJordan WalkerAug 11, 2025
If your SEVERIN Ultrasonic Jewelry Cleaner leaves streaks on the cleaned surface, it might be due to several reasons. Check if the squeegee lip is properly attached to the cleaning head. If it is soiled, remove it, clean both the lip and the cleaning head, and then re-attach everything. Also, ensure that the cleaning agent is correctly dosed by emptying and refilling the spray bottle.
General
