Seville Classics 10187 User Manual

PLEASE READ AND SAVE THESE INSTRUCTIONS
Instruction Manual for
UltraSlimline Floor Fan
Model: 10187 (with remote-control)
Voltage: 120V AC Frequency: 60 HZ Current: 0.6 A
2
1
Parts List
FAN-Body
BASE-Front
BASE-Back
A
B
C
Fan-Body SCREWS
D
Remote Control
F
Fan Assembly
STEP 1
Remove the 4 SCREWS D from the center post
on the bottom of the FAN - body A .
Base SCREWS
and CLIPS
E
c 2006 Seville Classics Inc. (800)-323-5565 or (310)-533-3800
www.sevilleclassics.com

Seville Classics 10187 Specifications

General

Brand	Seville Classics
Model	10187
Category	Fan
Language	English

Summary

Fan Assembly

Step 1: Initial Screw Removal

Remove the 4 SCREWS D from the center post on the bottom of the FAN - body A.

Step 2: Base Assembly

Unscrew base SCREWS and CLIPS E from BASE-back C, snap BASE-front B onto BASE-back C.

Step 3: Power Cord Routing

Pass the Power Cord through the center hole in the BASE and align BASE front with FAN front.

Step 4: Final Base Attachment

Run power cord through guide on BASE-back, set fan upright on base.

Control Panel Operation

Control Panel Overview

Details the functions and indicators on the fan's control panel.

Power and Speed Control

Explains the ON/OFF button and speed selection for Low, Medium, and High.

Timer and LED Indicators

Describes timer settings up to 7.5 hours and the function of LED indicators.

Wind Mode Selection

Explains Normal, Sleeping, and Natural wind modes with speed variations.

Oscillation Control

Details how to control the fan's oscillation function and adjust angles.

Remote Control and Maintenance

Remote Control Functions

Details how to use the remote control for power, speed, wind mode, timer, and oscillation.

Storage and Cleaning

Provides guidance on how to clean the fan and store it properly.

Important Safety Instructions

General Safety Precautions

Lists crucial safety precautions to follow when using the fan, including electrical safety.