Need help?Do you have a question about the SEVVA SMART PANEL HEATER and is the answer not in the manual?
Download the Smart Life app, register an account, and agree to privacy policy.
Configure your smart home by adding family members and rooms after registration.
Scan the QR code using the Smart Life app to add the Smart Panel Heater.
Manually select 'heating (wifi)' under 'small household appliances' to add the heater.
Attach feet to the heater base using provided screws on a flat, stable surface.
Mount brackets to the wall and slide the heater into the wall slots.
The heater starts in standby mode upon switching on.
Cycle through ECO, Comfort, and Anti-freeze modes using the MODE button.
Adjust temperature using UP/DOWN buttons within a specific range for modes.
Set timer for switching off or switching on later.
Activate child lock with UP/DOWN buttons; turn off display by holding TIME button.
Remote control functions mirror panel buttons but lack 'hold' function; range is 2 meters.
Perform same actions on the app as on the control panel.
Set up automated actions based on conditions like weather or time.
Avoid skin contact, use indoors, keep away from flammables, objects, and water.
Disconnect, cool down, use hoover for dust, clean exterior with damp cloth.
Disconnect, cool down, clean, and store in original box in a dry, ventilated place.
Ensure the device is in an upright position; it has a tilt sensor.
Check Wi-Fi band (2.4GHz), router settings, or reset the heater.
General| Type | Panel Heater |
|---|---|
| Power | 2000W |
| Voltage | 220-240V |
| Heating Technology | Convection |
| Timer | 24-hour timer |
| Oscillation | No |
| Energy Efficiency Class | A |
| Smart Features | App control |
| Thermostat | Digital thermostat |
| Safety Features | Overheat protection |
| Control Type | Touch control panel |
| Remote Control | Yes |
To Next Page