Need help?Do you have a question about the SEW-Eurodrive DT90 Series and is the answer not in the manual?
General| Brand | SEW-Eurodrive |
|---|---|
| Model | DT90 Series |
| Category | Servo Drives |
| Language | English |
Explanation of safety icons and general warnings for safe operation and handling of the motor.
Safety notes for motors/gearmotors and requirements for personnel performing work.
Diagram and list of components for the basic structure of AC motors.
Explanation of fields and example of an AC motor nameplate.
Conditions and checks required before installing the drive.
Guidelines for connecting motors, protecting systems against interference.
Guidelines for connecting the brake, including safety regulations and contactor types.
Checks and conditions to ensure before starting up the motor.
Procedure and dimensions for altering the blocking direction of motors with a backstop.
Step-by-step guide for reversing the backstop's blocking direction.
Table listing common motor problems, possible causes, and solutions.
Troubleshooting guide for issues related to brake release, application, and noise.
Table outlining inspection frequencies and tasks for brakes, motors, and drives.
Diagram and key for inspecting motor components like rotor, stator, bearings, and seals.
Step-by-step procedure for motor inspection and maintenance, including brake handling.
Procedure for measuring brake disk thickness and replacing the BMG02 brake.
Procedure to measure the working air gap of the BR03 brake.
Procedure to measure and set the working air gap for BMG05-8, BM15-62 brakes.
Procedure for replacing brake discs and setting the working air gap.
Procedure to set the working air gap for BMG61/122 brakes without encoder mounting.
Procedure for replacing brake discs on BMG61/122 brakes.
To Next Page
