Need help?Do you have a question about the SEW-Eurodrive DV132M Series and is the answer not in the manual?
General| Frame Size | 132M |
|---|---|
| Series | DV |
| Input Voltage | 3 x 380 - 480 V AC |
| Communication Interface | EtherCAT, PROFIBUS, CANopen |
| Ambient Temperature | 0°C to +40°C |
| Relative Humidity | 95% (non-condensing) |
Always follow the safety and warning instructions in these operating instructions.
Safety during and after operation, trained personnel.
Drive installation requirements: voltage match, no damage, ambient conditions.
Mounting requirements, alignment, protection, balancing.
Connecting motor via terminal boxes and small accessories.
Electrical release of brake, compliance with regulations.
Checks before and during startup.
Table of common motor problems, causes, and remedies.
Table of common brake problems, causes, and remedies.
Table of inspection and maintenance intervals for units.
Step-by-step procedure for motor maintenance.
Measuring brake disk thickness and replacing brake.
Measuring working air gap for BR03 brake.
Measuring working air gap for BMG05-8, BM15-62 brakes.
Setting working air gap for BMG61/122 brake.
To Next Page
